How to paint stained kitchen cabinets

May 14, 2025

Leave a message

Here's a step-by-step guide to ​painting stained kitchen cabinets​ for a fresh, modern look. With proper prep and technique, you can transform dated wood into a sleek, durable finish:


​Tools & Materials Needed​

​Cleaning Supplies: Degreaser (e.g., TSP substitute), microfiber cloths

​Sanding Tools: 120–220 grit sandpaper, orbital/detail sander, tack cloth

​Primer: Oil-based (e.g., Zinsser BIN) or stain-blocking latex (e.g., KILZ 2)

​Paint: Acrylic enamel (e.g., Benjamin Moore Advance, Sherwin-Williams Emerald UTE)

​Brushes/Rollers: High-quality angled brush + foam roller for smooth finish

​Painter's Tape: Protect walls, countertops, and hinges

​Safety Gear: Respirator, goggles, gloves


​Step 1: Remove Doors, Drawers & Hardware​

Label doors/drawers with painter's tape (e.g., "Upper Left 1").

Remove hinges, handles, and hardware.

Clean surfaces with degreaser to remove grime (skip this = peeling paint!).


​Step 2: Sand the Cabinets​

​Coarse Sanding (120 Grit)​:

Sand all surfaces to remove the glossy finish and rough up the stain.

Focus on edges and grooves (use a detail sander or sanding sponge).

​Fine Sanding (220 Grit)​:

Lightly sand again for a smooth base.

​Wipe Down: Use a tack cloth or damp rag to remove dust.


​Step 3: Apply Primer​

​Choose Primer:

​Oil-Based​ (Zinsser BIN): Best for blocking tannins and stains.

​Water-Based​ (KILZ 2): Low odor, easier cleanup.

​Apply Thin Coats:

Use a brush for edges and roller for flat surfaces.

Let dry 2–4 hours (oil) or 1–2 hours (latex).

​Lightly Sand: Buff primer with 220 grit for smoothness.


​Step 4: Paint the Cabinets​

​Paint Type:

​Acrylic Enamel: Self-leveling, durable (e.g., BM Advance).

​Cabinet Paint: SW Emerald UTE or Behr Cabinet & Trim.

​Technique:

Brush on corners/edges, then roll flat surfaces.

Apply ​2–3 thin coats​ (thick coats = drips!).

Let dry 4–6 hours between coats.

​Sand Lightly: Use 400-grit sandpaper between coats for glass-like smoothness.


​Step 5: Reassemble & Protect​

​Reattach Doors/Drawers: Wait 24–48 hours for paint to fully cure.

​Add Protective Finish (Optional)​:

Clear polyurethane (water-based) for extra durability.

​Touch Up: Use a small brush to fix nicks or scratches.


​Pro Tips for Flawless Results​

​Work in a Dust-Free Zone: Close windows/doors while painting.

​Keep Wet Edge: Paint one cabinet at a time to avoid lap marks.

​Test Paint Color: Sample on a cabinet interior first.

​Avoid Humidity: Paint in 50–70°F (10–21°C) temperatures.


​Common Mistakes to Avoid​

❌ Skipping sanding → paint peels.

❌ Using low-quality brushes → visible streaks.

❌ Rushing drying times → sticky, uneven finish.


​Cost & Time Estimate​

​Task​ ​Cost​ ​Time​
Supplies 100–100–100–200 –
Cleaning/Sanding – 4–6 hours
Priming/Painting – 2–3 days

​Paint Color Inspiration​

​Classic White: BM Chantilly Lace, SW Pure White

​Moody Hues: SW Urbane Bronze, BM Hale Navy

​Warm Neutrals: SW Agreeable Gray, BM Edgecomb Gray


With patience and attention to detail, you can give your stained cabinets a high-end, custom look for a fraction of replacement costs. Happy painting! 🎨✨

Send Inquiry