Types of handles

‌Milling groove handle‌: Milling grooves of different shapes on the side of the door panel, simple but not without decorative effect, suitable for a variety of cabinet doors‌. ‌Baffle handle‌: Set baffles inside the cabinet body, suitable for upper and lower split cabinets, such as shoe cabinets, sideboards, etc.‌. ‌45 degree bevel handle‌: suitable for floor cabinets and wall cabinets, with neat appearance, but high requirements for craftsmanship‌. ‌G-type handle‌: suitable for cabinet drawers and wardrobes, with a variety of colors, beautiful and practical‌. ‌Built-in handle‌: Suitable for cabinet door panels and drawers, low cost, beautiful and generous‌. ‌Rebounder‌: the handleless design is simpler and suitable for a variety of scenarios, but the life is limited and easy to break‌. ‌Thumb handle‌: Suitable for side-mounted handles, no need to leave door gaps, convenient and practical‌. ‌ ‌Embedded handle‌: Beautiful design, easy to use, avoid bumps, suitable for families with elderly and children‌. ‌Hanging handle‌: Designed with hanging style, low cost, no additional processing, but certain requirements for the position of the cabinet door‌. ‌Waistline handle‌: Divide the waistline according to the golden ratio, simple and beautiful, but some positions are higher and need to reach up‌. ‌JC handle‌: suitable for any position, beautiful and atmospheric, but high requirements for the edge sealing of paint-free board‌. ‌Exposure handle‌: Economical and affordable, easy to install and practical, although lacking in beauty, but it looks very good if the right style is chosen‌. ‌These handles have their own characteristics and are suitable for different scenarios and needs. For example, milling groove handles and baffle handles are suitable for a variety of cabinet doors, while beveled 45-degree handles are suitable for floor cabinets and wall cabinets. G-type handles and embedded handles are suitable for cabinet drawers and wardrobes respectively, with beautiful and practical characteristics. The rebounder and thumb pull offer a cleaner design option.